# DIY Recirculating NFT System with VIVOSUN Pump & Fittings

> Learn to convert a Tower Garden or LetPot vertical into a recirculating NFT system using VIVOSUN tools, with step‑by‑step guidance and pro tips.

- Date: 2026-11-16
- Author: Expert Guide Team
- Category: Convert a Tower Garden
- Canonical: https://indoorherbfarm.com/blog/diy-recirculating-nft-system-with-vivosun-pump-fittings/

## Introduction

This guide explains how to convert a Tower Garden or LetPot vertical planter into a recirculating nutrient film technique (NFT) system. One will discover why NFT offers superior water efficiency and faster [plant](#) growth compared with static hydroponics. The instructions combine practical engineering with reliable VIVOSUN products to ensure durability and quiet operation. By the end of the article the reader will possess a fully functional, low‑maintenance vertical farm.

## What You'll Need

- VIVOSUN 850GPH Water Pump ([VIVOSUN 850GPH Water Pump](https://amazon.com/dp/B086QJPQ6X?tag=wpem020126-20&ascsubtag=indoorherbfarm-com)) – $26.99, 4.3★ rating
- VIVOSUN Wall‑Mounted Hydroponic Kit ([VIVOSUN Wall‑Mounted Hydroponic Kit](https://amazon.com/dp/B08GPXVHD8?tag=wpem020126-20&ascsubtag=indoorherbfarm-com)) – $61.59, 4★ rating
- Optional: VIVOSUN Hydroponic Grow Kit 36 Sites ([VIVOSUN Hydroponic Grow Kit 36 Sites](https://amazon.com/dp/B08GQ1PT2P?tag=wpem020126-20&ascsubtag=indoorherbfarm-com)) – $69.99, 4★ rating
- John Guest quick‑connect fittings (compatible 5/16" tubing)
- Food‑grade PVC‑U pipe, tubing, and zip ties
- Timer controller (included with VIVOSUN kits)
- pH meter, nutrient solution, and grow [lights](#) as needed

## Step 1: Disassemble the Existing Vertical

Begin by removing all planting baskets, net pots, and any integrated pump from the Tower Garden or LetPot unit. One should carefully label each pipe segment to simplify reassembly later. Clean the interior surfaces with a mild bleach solution to eliminate algae and debris that could clog the new pump. Ensure the base is level; an uneven platform will cause uneven [water](#) flow and may damage the pump.

## Step 2: Build the NFT Channel Framework

Using the food‑grade PVC‑U pipes from the chosen VIVOSUN kit, construct a sloped channel that runs the length of the vertical frame. A slope of approximately 1:40 (one inch drop per 40 inches of pipe) provides sufficient gravity‑driven flow while preventing root rot. Secure the pipes with zip ties and PVC brackets, and verify that the highest point is at the rear of the tower. The wall‑mounted kit includes pre‑drilled holes that align with the timer and pump inlet, simplifying installation.

## Step 3: Install the VIVOSUN 850GPH Water Pump

Place the [VIVOSUN 850GPH Water Pump](https://amazon.com/dp/B086QJPQ6X?tag=wpem020126-20&ascsubtag=indoorherbfarm-com) in a waterproof reservoir at the lowest point of the system. The pump’s 850 GPH capacity easily handles the flow requirements of a 36‑site NFT layout, and its 28 dB noise level ensures a quiet environment. Connect the pump outlet to the top of the PVC channel using 5/16" tubing and a John Guest fitting for a leak‑free seal. The pump’s anti‑drying thermal protector will automatically shut off if water levels fall below the inlet, protecting the motor.

## Step 4: Connect the Timer and Power Supply

Attach the timer supplied with the VIVOSUN kit to the pump’s power cord, then program it for five minutes of operation every thirty minutes. This intermittent cycle creates a thin nutrient film while conserving energy and extending pump life. Verify that the timer’s voltage rating matches the pump’s 110‑120 V requirement; the VIVOSUN pump operates at 60 W, well within typical household circuits. Plug the system into a grounded outlet and confirm that the pump starts and stops according to the schedule.

## Step 5: Prepare Planting Sites

Insert net pots or the nest baskets provided in the VIVOSUN Wall‑Mounted Hydroponic Kit into each of the 36 planting slots. Fill each basket with a starter medium such as compressed peat or Rockwool, which holds seedlings while allowing roots to dangle into the nutrient flow. Position seedlings so that roots are at least one inch long before transplanting, as this reduces transplant shock. The kit’s food‑grade PVC‑U pipes are 31.1 inches long, offering ample space for lettuce, basil, and other leafy greens.

## Step 6: Fill Reservoir and Adjust Nutrient Solution

Fill the reservoir with de‑chlorinated water and add a balanced hydroponic nutrient concentrate at the manufacturer’s recommended concentration (typically 10 tsp per 5 gal). Use a calibrated pH meter to adjust the solution to a pH of 5.8–6.2, the optimal range for most leafy vegetables. The pump’s 5‑ft power cord provides flexibility for positioning the reservoir beneath the tower, keeping the overall footprint compact. Monitor temperature; the pump may warm water slightly, so consider a small chiller if ambient temperatures exceed 75 °F.

## Step 7: Test Flow and Fine‑Tune

Activate the system and observe the nutrient film as it travels down the PVC channel. The 360° omnidirectional filter in the pump’s bottom inlet removes debris, ensuring a clear film. If flow appears sluggish, adjust the pipe slope or add a ball‑valve adapter to increase pressure, as recommended by experienced users. Listen for the pump’s quiet operation; any increase in noise may indicate blockage or air entrainment.

## Tips & Pro Tips

- Keep a spare VIVOSUN 850GPH Water Pump on hand; the pump is rated for continuous use but may fail if run dry.
- Use a clear reservoir lid to minimize evaporation while allowing visual inspection of water level.
- Integrate a small inline air stone to oxygenate the nutrient solution, promoting healthier root development.
- Periodically clean the pump’s bottom inlet with fresh water to prevent bio‑film buildup, as suggested by reviewers who praise its easy maintenance.

## Troubleshooting

**No Flow:** Verify that the pump is primed and that the inlet is not obstructed by debris. Check the tubing connections for leaks and ensure the timer is set correctly.

**Pump Overheating:** Reduce the run time or add a heat‑sink fan; the pump includes a thermal protector that will shut off at 185 °F to prevent damage.

**Root Rot:** Increase the off‑cycle duration of the timer to allow roots to aerate, and consider raising the base by 2‑3 inches to improve drainage.

## Conclusion

This step‑by‑step guide demonstrates how to transform a commercial vertical planter into an efficient recirculating NFT system using reliable VIVOSUN components. One benefits from reduced water consumption, faster growth cycles, and a quieter growing environment. By following the outlined steps, adjusting flow rates, and applying the pro tips, the reader can achieve a robust hydroponic setup suitable for home or small‑scale commercial use. Continued monitoring and periodic maintenance will ensure long‑term success.

## Frequently Asked Questions

### How do I convert a Tower Garden or LetPot into a recirculating NFT system?

Install the VIVOSUN wall‑mounted hydroponic kit, connect the 850 GPH pump to the vertical tower with 5/16" tubing, and set the pump to continuously circulate nutrient solution over the plant channels.

### Why is a recirculating NFT system more water‑efficient than static hydroponics?

NFT continuously re‑uses the same nutrient solution, so only a small amount evaporates or is taken up by plants, reducing overall water consumption.

### What pump size is recommended for a DIY vertical NFT setup?

The VIVOSUN 850 GPH water pump provides enough flow for most 4‑to‑6‑foot towers while remaining quiet and energy‑efficient.

### Can I use any tubing with the VIVOSUN pump and fittings?

Use 5/16" quick‑connect tubing compatible with John Guest fittings for a leak‑free, easy‑to‑assemble system.

### How often should I check and maintain the recirculating NFT system?

Inspect the pump and tubing weekly for clogs, replace the nutrient solution every 2‑3 weeks, and clean the channels monthly to prevent algae buildup.
